What Causes The Bearing to Be Easily Damaged?
The main reason for bearing damage is long-term use, the internal grease is
quickly damaged, the internal water is rusty, and the beads are not running
smoothly. The bearing bead net is broken when the bearing is running under
strong power. The beads are scattered and the wheels cannot run normally. In
some cases, the internal operation of the bearing is not smooth, and the outer
circle is enlarged by the strong driving force, which causes more serious
The quality of the bearing manufacturers is uneven, there are some
manufacturing process problems, and the quality of the butter added in it is
also different. In order to reduce the cost of the quality of the butter, some
manufacturers generally use the ordinary type. In actual operation, the heat
resistance and wear resistance of the bearing are reduced, and the service cycle
is not long.
No need to add butter when installing electric vehicles and motorcycles
The bearings of the front wheels of electric bikes are broken after riding
for a period of time. Some customers come to replace them and ask to replace
them with the best ones. It can take more time. The bearings of the original
bikes are broken after a few years have not been used. When installing the
bearings, some people say that adding more ring oil will take longer, and they
must add more butter.
The open bearing is filled with butter, so there is no need to add it. Some
bearings were opened and found that there was only half of the butter, which
needed to be added, and even a small amount of butter was added to some
bearings, which required a proper amount of butter.
We are Motorcycle Bearing Manufacturer, welcome to contact us.